(1) SMT solder paste mixer× 1
Name: Paste Mixer (Paste Special Mixing Tool)
Material: handle for the wood material, stirring for the stainless steel material.
Description: used to stir the solder paste, stirring can make the solder paste composition even.
(2) Manual printing table QS-2430 × 1
The manual press is printed on the pad of the PCB (pad middle) for the next process. Manual printing machine is manual to put board, positioning, printing, picking and cleaning the work of the screen.
Model: QS-2430
Printing area: 240mm × 300mm
Positioning method: edge positioning or hole positioning
Adjustment mode: manual fine tuning
Adjust the direction: before and after, around, up and down
Printing accuracy: 0.5mm Pitch QTP
(3) SMT stainless steel scraper × 1
SMT tin slurry scraper stainless steel scraper
(4) vacuum suction pen QS-2008 × 1
Accessories Description: 1 vacuum pump, 2 transparent hose, 2 aluminum pen tube, 2 sucker (6MM), 3 suction nozzle.
Vacuum suction pen, can easily take four sides of the pin, double-sided pin IC.IC pull from the special.
Artificial patch pen is an important tool for manual surface mount technology. It is mainly used to simulate the patch pressure of the patch pen, and the air pressure difference (reverse vacuum) produced by the manual patch pen itself, The material is sucked directly, and then the components are manually placed in the corresponding PADS position, through the adjusted pressure suction, manual patch pen suction is less than the adhesion of tin paste (patch glue), components automatically placed in the Corresponding to PADS.
The other can be adjusted by adjusting the size of the suction to adapt to different sizes of weight components.
Artificial patch pen is more stable and more efficient than traditional tweezers. Artificial patch pen directly from the material to take, to avoid waste components, while no positive and negative components of the problem, so that the chip is more efficient, while the manual patch directly suck the back of the components, to avoid tweezers The edge of the device, damage the pad position, to avoid causing tin beads, welding and welding and other phenomena. Moreover, the use of suction pen suction IC back, etc., to avoid IC feet skew may cause false welding, welding and so on.
Artificial patch pen and fully automated SMT production line with the use of pick and place shaped components, improve the entire production line production efficiency is of great significance. And with the automatic SMT production line, the small batch production or testing and the use of tight production is not a good alternative.
1. Manual placement machine, pneumatic suction pen small size, easy to use, can be adjusted to the size of the gas, the two can be used at the same time.
2. For SMT components to pick up and install
(5) three tank feeding rack × 1
With the use of manual patch pen can be disc-shaped components hanging on the shelf, directly from the tray on the tape through the manual patch pen to absorb chip components, without the material to be folded, is conducive to reducing the process, To improve the speed of the workers pick up the components; at the same time as the unused components on the tray with a vacuum packaging tape, the number of components can be controlled to prevent the loss of components and metal contacts in the welding can be effectively prevented due to the oxidation of components generated by the Weld phenomenon.
(6) desktop lead-free reflow / reflow QS-5100 × 1
To achieve the static state of the welding work, can be mounted on the narrowest spacing of surface-mounted components
First, the small desktop lead-free reflow / SMT reflow QS-5100 product brief
"QS-5100 Infrared Reflow Furnace" (reflow oven) is a kind of for the production and maintenance of SMT and other products of the desktop reflow equipment. The product uses high efficiency far infrared heating elements and distributed thermocouple temperature measurement device. Through the microcomputer's precise control, the temperature curve of the reflow furnace is controlled more accurately and the temperature of the weldback plane is more uniform. Fully adapted to a variety of different alloys and lead-free solder reflow requirements. The temperature curve is adjustable, in addition to the device also has automatic fault detection alarm, automatic shutdown and other functions. This product has a variety of applications such as reflow, repair, drying and so on. Suitable for small quantities of SMT electronic products production, trial production, electronic product development, school training courses and other units.
Operating software for the latest upgrade in English bilingual dual display optional operating system. Circuit structure on the use of efficient, convenient integration of the switching power supply, the use of high temperature aluminum silicate insulation cotton, in the performance of the structure and operation and other aspects of the improvement and upgrading.
Second, the small desktop lead-free reflow / SMT reflow QS-5100 main features
1, fully enclosed design, built-in high-performance insulation materials and a high efficiency seal, good insulation effect, heat and corrosion resistance, easy to clean, effectively reduce power consumption, save energy.
2, the use of drawer-type PCB board rack, sliding a smooth, large area of space, suitable for different sizes and shapes of PCB board placement.
3, can be completed CHIP, SOP, QFP, BGA and other packaging forms PCB board welding.
4, can be completed glue curing, PCB board aging and other work.
5, small size, light weight, can be used on the office countertops, easy to learn.
6, single-phase 220V lighting power supply, easy to use.
7, the machine shape using user-friendly design, LCD screen in front of the machine, more suitable for observation and operation on the seat.
8, this product has more advantages more suitable for BGA lead-free soldering
Third, the small desktop lead-free reflow / SMT reflow QS-5100 main technical parameters
1, input power: AC220V / (AC110V order)
2, the operating frequency: 50 ~ 60Hz
3, the maximum power: 600W
4, heating method: infrared radiation and hot air mixed heating method
5, the operating system: QS-5100 Chinese and English bilingual operating system
6, the display mode: graphics mode / text mode optional display mode
7, working mode: automatic reflow mode, adjustable constant temperature maintenance mode
8, the temperature curve section: preheat section, heating section, welding section, heat section and cooling section of a total of five
9, preheat section temperature setting range and time: 70 ~ 150 ℃, time: 0 ~ 5min
10, heating section temperature setting range and time: preheat section temperature ~ 220 ℃, time: 0 ~ 5min
11, the welding section temperature setting range and time: heating section temperature ~ 300 ℃, time: 0 ~ 30s
12, the temperature of the temperature range and set the temperature: welding section temperature - (0 ~ 50 ℃)
13, drawer Working area: 230 × 180mm
14, Dimensions: 300 × 250 × 160mm
